Bullet Outdoor IP Camera Model: RVCM52E Installation Guide
8 Figure 6 Control Panel Update Page 4. Click the Network Cameras link in the left-hand column; the IP Camera List page is displayed. Figure 7 IP
9 7. Click Add. If an “unable to configure Internet Access”, “UPnP Client Error” or similar message is displayed, refer to the Troubleshooting sect
10 Defining Camera Trigger Settings Any event from the following list can be defined to trigger an alarm. Partition Events Fire Alarm Panic Alarm Me
11 3. Define the following fields in the Add Trigger dialog box: Field Description Event Type Label Enter a name for the camera trigger Partitio
12 5. Define the following image (still) and clip (video) definitions: Field Description Images (still) Pre-event starting time (sec) – time, befor
13 Troubleshooting Internet Configuration/UPnP Client Error Not all routers support UPnP and in some routers UPnP is disabled by default. If you have
14 2. Once the Camera Interface Login page is displayed, enter the User and Password into the relevant fields and click Login. NOTE: By Default the U
15 NOTE: By default the TCP/IP settings should already be defined. 5. Click Save to save the changes. 6. Select Connection. The Connection Parameter
16 2. Navigate to the Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding page is displayed. Figure 19 Port Forwarding page (em
17 Product Specification Performance Please refer to the following table for product performance specification. Parameter System Main Processor TI
Safety Precautions These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. WARNINGS:
18 Parameter General Parameter Power DC 12V Warning! Do not connect these two power supplying sources to the device at the same time; it may result
19 NOTES
20 RISCO Group Limited Warranty RISCO Ltd. ,its subsidiaries and affiliates (the "Seller") warrants its products to be free from defects in
21 Contacting your Installer / Supplier-Agent When calling for service, ordering components, or for questions related to your camera, please contact u
22 Contacting RISCO Group RISCO Group is committed to customer service and product support. You can contact us through our website (www.riscogroup.com
1 Contents Safety Precautions ... 2 Introduction
2 Introduction RISCO Group presents VUpoint, a revolutionary live video verification solution which seamlessly integrates IP Cameras within RISCO’s pr
3 IP Camera Components and Dimensions Figure 1 IP Camera Components Label Port Name Function Connector Description 1 LAN Network port Ether
4 IP Camera Mounting and Installation After reading the installation instructions and before installing your IP camera, prepare a plan for mounting th
5 Step Description 1 Place the installation positioning template on the installation surface such as ceiling or wall. 2 Make holes in
6 Powering-up the IP Camera Connect the camera power adapter to an electrical outlet. Connecting the IP Camera to the Network The IP camera supports a
7 IP Cameras and the RISCO Cloud Installer Application The RISCO Cloud Installer Application provides an interface to your control panel from a local
Comments to this Manuals